Convenient do-it-yourself selfie stick: detailed instructions. Features of connecting a selfie stick on Android smartphones How to make a monopod

Selfie is a newfangled trend that has taken over the whole world. Photographing yourself with a mirror has gradually sunk into oblivion: on the wave of excitement - self-portraits created using special tripods or monopods.

Selfie lovers use different photo techniques. Monopods equipped with a Bluetooth button are very famous, there are models that are optimal for athletes, avid travelers, resourceful video bloggers and creative individuals.

Convenient "stick": buy or make?

The use of an ergonomic tripod for photography is certainly better than a traditional selfie: hands do not tremble, more little things are fixed on background, unique frames are created. For this reason, convenient "sticks" for selfie are instantly swept away from the store counter.

You can also save time on their manufacture and order in your favorite color on our website. However, is it possible to make a monopod with your own hands using publicly available materials and tools? We invite you to familiarize yourself with the simplest technique creating and assembling your own monopod.

Assembling the monopod by hand

The manufacturing process of the universal includes several stages.

Necessary materials:

• building hair dryer;
• drill / screwdriver;
• 4.5 mm drill;
• PP pipe (d=20 mm);
• clamp;
• 6 mm bolt;
• Stationery knife;
• glue gun;
• foam rubber (30*30 cm)
• rope.

Assembly:

1. Heat up the upper part with a hair dryer polypropylene pipe, then we press the molten material with a clamp.

2. When the pipe has completely cooled down, the clamp is removed.

3. Again we heat up the tube, at the same time bending it with a clamp. This is necessary to obtain the desired angle of inclination, which depends on individual preferences.

4. Remove the clamp and round off the end of the tube with a utility knife.

5. We make a through hole with a drill or a screwdriver.

6. Create a handle: wrap the free area of ​​the tube with foam rubber, which is then glued with hot glue.

7. The edges of the foam rubber are cut off with a knife.

8. We will equip the handle with a rope for convenient operation of the “selfie stick” by making a hole on one side of the pipe under the foam rubber.

9. Fasten the camera to the new monopod with a bolt.

Your monopod is ready to use.

There are several more options on how to quickly and inexpensively assemble a monopod for different purposes, whether it's a Go Pro camera or a tripod for a camera.

See one of them in the video example.

The accessory is a holder for a camera or smartphone with a static or variable length. Top Models have a telescopic device and are equipped with clamps. The handle is often ergonomically shaped with non-slip material. There are different ways to connect a monopod to a phone: wired, wireless (via Bluetooth).

How a selfie stick works

The principle of operation of the selfie stick is to securely mount the camera at some distance from the user and the possibility remote control shooting. A standard monopod consists of the following parts:

1. Pen. Made of durable non-slip material, which prevents the stick from slipping out of the palm of your hand.
2. A tube. Folding, telescopic or composite. It happens to be equipped with additional clamps at the points of articulation of parts.
3. Holder. The clip or tension joint and hinge serve to securely fix the phone and give it the desired angle relative to the telescopic base of the monopod.
4. Transmitter. Wired or wireless device for remote control of smartphone camera. Can adjust the zoom ratio, activate shooting.

monopod with bluetooth

The wireless method of connecting the phone to the selfie stick reduces the weight of the accessory, reduces the volume it occupies, and ensures that the camera is triggered in the absence of interference. There are two types of such tripods:

1. Monopod for a selfie with a bluetooth button. The accessory is equipped with a remote control built into the case (often with a single button). The device is break resistant. Such selfie sticks are made by the following manufacturers: Momax, KjStar, Baseus.
2. With remote. Portable tripods equipped with a remote control are an excellent choice for shooting a large group of people or one or two people in front of a specific subject. Such a selfie stick can be installed at a small distance from the object being filmed, and then, taking a place in the frame, activate the shooting. Popular manufacturers: Remax, Navsailor, Dispho, KjStar.

With button

Push-button selfie sticks stand out from the background of the simplest tripods with their ease of use. Often a Bluetooth connection requires the installation of a special software to the device. Please note that the driver for iPhones using operating system iOS may differ from the standard. The disadvantages include a high chance of losing a button from a stick equipped with a removable remote control. You can buy this type of monopod from manufacturers:

• sentar;
• Yunteng;
• Dispho;
• KjStar.

On a tripod

The simplest selfie sticks are less convenient, but differ from models equipped with a remote control by a very low price. Often these accessories are equipped with additional hinges to find the best shooting angle. Due to the lack of control, the camera is set to a slow shutter speed or a timer. In the production of models, the emphasis is on reliability and ergonomics or economy. The following companies offer simple selfie sticks without controls:

• KjStar;
• sentar;
• Remax;
• Yunteng.

Monopod for the camera

Professional photography on good camera It requires the photographer to be patient and to be able to choose a good angle. Camera monopods have a longer "leg" that has a small flat stop or peg at the bottom to make it easier to use. Some models are equipped with an electronic gyroscope.

A number of companies produce tripod tripods, additionally equipped with a fourth "leg" installed in the center. The body material is light and durable. Better for this are carbon fiber (carbon fiber), aluminum. The following manufacturers assemble camera tripods:

• Manfrotto;
• Yunteng;
• Velbon;
• BENRO.

How to connect a monopod

For successful use of a tripod, it is important to correctly install the phone in it and configure the interaction of devices. Any selfie stick connects to a smartphone in the following way:

1. Firmly fasten the phone to the screw clamp at the end of the tube, tighten the screws (without extra effort, otherwise the case may be damaged).
2. Set the desired angle of the holder using the hinge, so that you can then choose the right shooting angle.
3. If the accessory is connected via Bluetooth, turn on the display of nearby devices in the phone settings and connect the monopod.
4. The wired tripod connects to a smartphone via a headphone jack (standard mini-jack).
5. After connection, control is carried out using a separate remote control (bluetooth model) or a button on the handle of the accessory itself.

Video

Did you find an error in the text? Select it, press Ctrl + Enter and we'll fix it!

To improve the stabilization of the camera when shooting video, a monopod with an inertial stabilizer is perfect, the manufacture of which will be described in this article.

Regular monopod

A simple, straight monopod can be made from scrap materials.

For manufacturing you will need:

1. Threaded tripod head.
2. Fasteners from the tripod-clamp FED.
3. Textolite handle Ø18mm.
4. Steel rod Ø5x85mm.
5. Threaded bush M5x8x35mm.
6. Washer 20mm.
7. Rubber foot Ø20x20mm.

The FED clamp is a device for fastening the camera to flat surfaces: tables, railings, window sills...). The design of the monopod is simple. Threads must be cut on both sides of the bar. Attach the rubber foot on one side and the camera mount on the other. This monopod is good, but not perfect. First, it gets bulky. It would be more convenient to be able to fold it, reducing the length. Secondly, there were camera swings from side to side. The monopod will not get rid of this in the form in which it is now.

Design improvement

The next copy will be made from a telescopic tube. This will allow you to shoot sitting and standing. Telescopic tube can be bought at the store building materials or at a hardware store. Telescopic holders are designed for painting walls or ceilings.

It is advisable to pick up a handle with three sections, but more often they are found with two. The handle is very long, so it needs to be shortened.

Disassembled handle.

Assembly

The telescopic tube is quite fragile, so rubber washers must be installed between the elements.

When the nuts are tightened, the rubber compresses and the body of the telescopic tube bears minimal stress.

The support leg must be made rotatable in order to rotate the monopod during shooting without any obstacles. To do this, you need to make a long thread or organize rotation with washers and bolts. If the intermediate washers are too large in diameter, they can be ground on the machine. For uniform grinding of washers around the entire circumference, they must be clamped on a hairpin and constantly rotate evenly when grinding.

Shortening the telescopic tube

Our tube is too long, so it needs to be shortened. We will cut the tube on both sides.

You can mark with a scriber or a thin marker. In order not to damage the paint during sawing, the cut area can be wrapped with electrical tape or thick paper. We will cut with an ordinary hacksaw for metal. The blade should be positioned so that the teeth are directed away from you, and you need to saw only on yourself. This will complicate the task, but will allow you to get a more even cut. The final finishing can be done with sandpaper.

inertial stabilizer

To stabilize handheld shooting, this stabilizer will be added to the monopod. Weights allow you to stabilize the camera not only in the vertical, but also in the horizontal plane. The weights are spaced 30 cm each. The design is not the most convenient and beautiful, but for shooting at home or on the road among friends, it is quite suitable for use.

Stabilizer design

1. weight - steel Ø50x50mm.
2. hairpin M6 x 300 mm.
3. flange - steel Ø30x8mm.

The total weight of the goods is 1.5 kg. The weights are attached to the studs, and the studs are interconnected by a flange.

Nowadays, the phenomenon of "selfie" is becoming very popular, especially among young people. Selfie is a type of photographic self-portrait. When creating a selfie, the device is pulled out by the person being photographed to the length of the entire arm and a picture is taken. By photographing himself, a person can capture the most interesting moments of his life, however, it is not always possible to fully accommodate the entire surroundings of the area, since his viewing angle is limited by the length of his arms.

It is for this purpose that the selfie stick was created, which allows you to increase the viewing angle in the photo. It allows you to take pictures at a distance of up to 1.5 meters. This device is also called a selfie stick or monopod.

Selfie stick device

Usually, plastic or metal is used to make a monopod. Its body has a telescopic structure. On one side of the selfie stick, there is a special slot for the phone, thanks to which a photo is taken. There is a rubber grip on the other side of the monopod.

Many models of monopods have a Bluetooth or wi-fi system for remote control of your smartphone.

To take a picture using a selfie stick, you need to fix the smartphone in a special holder, then pull the stick a certain distance in front of you and press the monopod button.

Instructions for making a selfie stick with your own hands

It is not necessary to buy a selfie stick in stores, because it is quite possible to make it yourself. And it will turn out no worse than bought. To make a monopod with your own hands, you need to prepare the following materials:

• plastic pipe (diameter 2 cm)
• screwdriver or drill
• building hair dryer
• a small amount of foam
• clamp
• bolt (6 mm)
• stationery knife
• thermoplastic adhesive

Making a monopod with your own hands is carried out in stages:

1. At the first stage, it is necessary to heat the upper end of the polypropylene pipe until softened, using a building hair dryer. And then squeeze this area with a clamp
2. After cooling, one of the sides of the pipe will have a flat shape. After that, you need to remove the clamp
3. Again, it is necessary to heat up one of the sides of the polypropylene pipe using a building hair dryer in order for it to acquire the angle of inclination required for shooting. The angle of inclination can be customized
4. After cooling the polypropylene pipe, it is necessary to round off its edges with a knife, and make through holes with a drill or screwdriver in the flat part of the pipe
5. At the opposite end of the pipe you need to make a handle. To do this, several layers of foam rubber are glued with hot glue to reverse side pipes
6. At the bottom of the handle, you can make a hole under the foam rubber for the lace. This lanyard can then be worn around the wrist to secure the phone in the event of a fall.
7. The phone is attached to the monopod with a bolt.

Until a few decades ago, many of us did not even suspect that pictures can be taken with something other than a traditional camera. Fortunately, progress does not stand still. The rapid development of technology has led to the fact that today almost every one of us has mobile phones, to which a selfie stick (monopod) is easily selected. How to connect this device, how it works, you can find out by reading this article.

What is this device?

The telescopic selfie mono can be safely considered an improved version of a tripod for a camera. The vast majority of today's youth have already managed to appreciate this device, which greatly facilitates the process of photography. This tool is convenient because with its help you can take a picture of yourself against the backdrop of some picturesque area or an interesting monument without outside interference. In fact, a selfie monopod is a regular phone or camera, securely fixed on a tripod equipped with a remote control. With the help of a remote-controlled camera, you can easily capture yourself from various angles.

For those who are wondering how to connect a selfie stick to your phone, it does not hurt to know what to look for when buying this accessory. Despite the external similarity, each of the models presented for sale has its pros and cons. The most convenient, and therefore the most popular, is a stick with a button on the handle. A more bulky and less convenient option is an ordinary tripod. In the process of using it, you have to periodically set a timer to capture the next frame. Models without a button are suitable for those who want to save money.

The most durable are expensive tripods with reliable camera mounts. It is known that the maximum length of this two-kilogram monopod is about 200 cm.

How to assemble and set up the device?

Before you connect the selfie stick to your phone, you must carefully read the instructions that come with it. Having studied all the subtleties in advance, you can then easily assemble and connect it. First of all, you should choose reliable mounts of the right size for this modern device that facilitates the process of photographing. Having installed the fasteners on the stick tripod, you need to place the camera on it more comfortably and fix it well.

After that, you need to enter the settings of the activated camera and replace the function of the key that controls the volume level with the key of the camera itself. These manipulations should be carried out with smartphones. On the iPhone, they are completely unnecessary, since there will be an automatic change of settings.

How to charge a monopod?

We are considering how to connect a selfie stick with a button, but first you need to recharge it. Before starting another photo session, it is recommended to make sure that the monopod is fully charged. The indicator of the selfie stick connected to the USB port should flash red. The average charging time is about one hour. The end of the process is indicated by the extinguished light bulb.

How to connect a selfie stick to your phone?

To connect the phone to a wired telescopic tripod, you need to connect one end of the wire to the audio jack of the mobile phone, and the other end to the connector on the monopod.

Before connecting a selfie stick to a Lenovo phone, you need to activate the device itself, and then, opening the phone settings, find Bluetooth and start searching for devices. After waiting until the phone finds the monopod, you need to connect with it. After that, you can activate the camera and take pictures.

For those who do not yet know how to connect a selfie stick to the Nokia Lumiya, you need to repeat the algorithm of actions described above exactly.

Existing types of devices

Modern manufacturers produce several varieties of such monopods. Therefore, for those who have already understood how to connect a selfie stick to the phone, it will not hurt to deal with this issue. The simplest, and therefore the most budget option, is considered to be a regular selfie tripod. Its inconvenience lies in the need to set a timer on your phone or smartphone. And you will have to do this before each photographing. In addition, the monopod is equipped with not too strong mounts that are not designed for long-term use.

The next variation is a selfie stick with a Bluetooth remote. This more advanced model has a remote control that has two buttons at once. Both hands will be involved in the process of taking a photo. In one of them there will be a remote control, in the other - a tripod. As you can see, this also does not add convenience. In addition, this model is not designed for all types of smartphones.

Another fairly popular device is a selfie stick with a button and a wire, which is necessary to communicate with the camera. One of the main advantages of this model can be considered the presence of a button to release the shutter. It is located on the tripod itself.

But the most popular model is the monopod with a Bluetooth button on a tripod. When folded, the length of this device is only 23 cm. During operation, the length of the telescopic stick can be increased up to one meter. The device is equipped with a reliable steel phone holder. Charging such a device is enough for a 100-hour shooting. The main advantages of this monopod include ease of use and long service life.

How to use the device?

The rules for operating a monopod depend on its type. So, owners of an ordinary selfie stick must first attach a phone to it. The next step should be to enable phone camera and setting a timer. After that, you can safely adjust the length of the monopod and take a picture.

The Bluetooth Selfie Stick needs to be recharged before being used. This process will take at least one hour. After that, you need to attach a clip holder to the monopod. Now you can turn on the remote and the monopod itself. By setting Bluetooth - connection between the selfie device and the phone, you need to place the smartphone in the clip holder. After that, you just have to adjust the length of the tripod and press the button. Despite the fact that this algorithm is similar for all such devices, the steps may vary slightly depending on the device model. Therefore, to obtain high-quality images, it is recommended to carefully study the instructions that come with a particular monopod. This will not only affect the quality of the captured frames, but also significantly extend the life of the device.

Why doesn't the selfie stick work?

Some monopod owners are familiar with the problem when, due to a non-working device, it is impossible to capture some unique frame. Faced with such a situation, you need to make sure that the stages of connecting and recharging the device are carried out in full accordance with the instructions. After that, you should check the tightness of the connection of the contacts. It is likely that the whole thing is a broken Bluetooth button. A similar failure often occurs in case of insufficient recharging of the monopod. In addition, manufacturers could remove some very important and necessary settings from the phone's firmware. And this will greatly affect the quality. AT this case taking pictures with a timer can be a way out of the situation.