Flash nikon sb 700 reviews. Working with Nikon Creative Lighting System

The Nikon Dpeedlight SB-700, announced in September 2010, was the latest addition to the Creative Lighting System (CLS). The line began with the introduction of the base model SB-800 in 2003. Hardware is the most prominent component of the CLS, and flashes are highest value. Although the SB-700 is called a replacement for the SB-600, the previous model was not discontinued by Nikon, just like the SB-900.

Compatibility

The Nikon Speedlight SB-700 is powered by four AA lithium, alkaline or NiMH batteries, but zinc-carbon batteries are not recommended. It is fully compatible with CLS cameras, which are all of the manufacturer's digital SLR cameras (with the exception of the D100 and D1), and the film F6. Limited functionality possible with Coolpix E8400, E8800, P5000, P5100, P6000 and P7000 models. When used with other cameras, many functions will not be available. The manufacturer has set a retail price of $330, for which the buyer additionally receives a soft case, stand, diffusion dome, filters for incandescent and fluorescent lighting, as well as instructions.

Nikon SB-700 is equipped with a built-in reflector card and wide-angle diffuser, which can be installed separately or together.

Assembly and design

Nikon SB-700 does not offer anything new in its design. The rectangular body of the device includes a pan-tilt flash head with controls and an LCD screen located on the rear panel and various sensors on the front. Externally, the flash is similar to the Vivitar 283, produced in the 1970s, although a little more compact. The materials are similar, since plastic or composites have been used before. Although the head of the Vivitar 283 does not rotate, the overall layout has remained virtually unchanged in 35 years. However, the overall similarity between old and new disappears when you look more closely at the controls. If the 283 is simplicity itself, then the Nikon SB-700 has 9 separate controls and an LCD screen. The flash is somewhat different from the older second-generation model SB-900. A mode selector replaced a button, and a lighting pattern switch eliminated the need to call this function through the internal menu.

The characteristics of a flash cannot be determined by its number. Among the SB-600, 700 and 900 flashes, the SB-600 is the oldest, and the 900 is 2 years older than the 700. The changes in the controls of the SB-700 (and to a lesser extent the SB-900) are quite significant compared to the 600-800 generation models , and more importantly, they turned out for the better. Firstly, on the Nikon SB-700 the power switch has Remote and Master positions. Secondly, the flash received a selector with specific settings, whereas the 800 model had a mode selection button. What may seem like a fairly minor addition can make a photographer's life much easier.

Functionality

In addition to the built-in white bounce card, wide-angle panel and diffusion dome, the flash allows you to use a variety of accessories. One of the sought-after features of Nikon's CLS is the ability to operate multiple wireless flashes. You can set up 2 more sets and control them using the camera and SB-700 (3 sets for the 900 model). On the SB-800, you had to hold down the SEL button for 2 seconds to go to the menu screen, find the wireless menu, press SEL again, scroll to Remote or Master, and press SEL again to select an option. And this procedure had to be repeated for each outbreak. In the SB-700/900, just set the switch to remote or master mode. To do this, press the lock button in the center, which, given its small size, according to user reviews, makes this procedure inconvenient. The SB-700's mode selector is also more convenient than the SB-800's key, which had to be pressed repeatedly until the desired selection was made. The articulated head rotates 360°. The SB-700's menus and operations are more intuitive than those of the SB-800, and the user interface is simpler.

overheat protection

Like the 900, the SB-700 features a thermal shutdown feature that monitors heat due to fast work flash and slows down (and in extreme cases disables) recycle time to prevent thermal damage. The LCD display has a thermometer icon that shows the heating level and can serve as a warning that the temperature is reaching critical levels, but in practice it appears after the flash is turned off. After about 5 minutes the device is ready to use again, but be aware that it is programmed to lock itself to prevent self-harm. It's better to give the flash a break rather than let it break down and buy a new one.

Working with the camera

When using filters for different types of lamps, the flash recognizes their presence and transmits the information to the camera, which then adjusts the white balance accordingly. Nikon SB-700 supports slow sync, rear-curtain sync, slow rear-curtain sync, red-eye reduction, and slow sync with red-eye reduction, but these are set by the camera rather than the flash.

Red-eye reduction is performed using a series of pre-flashes that constrict the pupils. Animals may look away, so in this case the best solution is simple shooting with subsequent frame processing. If your subject is more cooperative, the SB-700 delivers pretty good results.

The flash allows you to quickly set standard, center or even light distribution using the illumination selector switch on the rear panel and can function as an AF-assist illuminator. Flash firmware can be updated via D3 or D300 cameras, but the wide range of Nikon DSLRs do not provide this option.

Exposure compensation

To change exposure compensation, you press SEL, turn the ring, press OK, and hope your subject stays in place. In the SB-600 it was enough to use the “+” and “-” buttons. A slider like the SB-30 would be ideal.

Remote and Master

In this mode, the flash operates as a slave device. Setting up groups and channels is easy: press SEL until Group or Channel is highlighted, turn the dial and press OK. The unit can function like the SU-4 by selecting MENU>REMOTE>SU-4.

In Master mode, the SB-700 controls the operation of other flashes. You need to set the channel and brightness of the slave devices by pressing SEL to select different settings and rotating the dial to change them.

Filters

When installing a filter, the flash uses small contacts to detect and identify it. On newer cameras such as the D7000, even in auto white balance mode, the camera senses the presence of the attachment and automatically selects the necessary settings. Filters SZ-3FL and SZ-3TN are designed specifically for the SB-700. They will not fit other models. The optional gel SJ-4 uses the SZ-3 holder. If you intend to use this filter, then in the flash menu you can indicate which color is currently selected.

Ready indicator

If the ready light blinks for 3 seconds after the photo is taken, the flash should have fired at full power and may be low on power. In this case, you should move closer, open the aperture, or use a higher ISO.

Zooming

Unlike a lens, when a flash "zooms" it only changes its reflector to diffuse or concentrate the light a little more or less. Despite Nikon's marketing tricks (and firmware programming to further confuse the user), the SB-700 performs just like any other model with a motorized zoom head made after 1986. It's really sad that Nikon wasted the switch on the right for this feature, instead of using it for exposure compensation, for example, like in the SB-30.

Efficiency

At ISO 100, the working distance of the Nikon SB-700 flash is 28 m, which is slightly inferior to the 30 m of the 600 model. “Slightly less powerful” is a recurring theme across the second generation CLS models – the SB-800 beats the SB-900 with 38m to 34m.

The instructions for the Nikon Speedlight SB-700 indicate a full recharge time of 2.5 s for alkaline and NiMH batteries, and 3.5 s for lithium batteries. When this time reaches 10 s, the batteries need to be replaced or recharged. Using the Sanyo Eneloop AA after 75 photos the SB-700 on the D3s shoots 9 frames at 9 fps with flash for each, the 10th without, and the next one again with flash. Each shot is well exposed and there are 9 shots before a ¼ second cooldown, which isn't too bad. Battery life is 330 shots for lithium batteries, 260 for 2600 mAh nickel-metal hydride batteries and 160 for alkaline batteries.

Conclusion

The Nikon Speedlight SB-700 is a component of the Creative Lighting system, which replaces the SB-600. The user interface is simple, intuitive, with faster shooting settings required by most users. Recharging is fast - a maximum of 2.5 seconds for most power sources - and partial discharges are produced at a rate of 9 flashes per second. Among the disadvantages of the Nikon SB-700, reviews cite a reduction in working distance compared to the SB-600, a significant increase in cost, and limited support for film cameras. The device is fully compatible with most SLR cameras Japanese manufacturer and several Coolpix, and of the film models, only F6 is fully supported. However, long-term users of the first generation CLS flashes (SB-800) are willing to pay the extra cost. The user-friendly interface is enough to justify the extra cost.

Together with the recently introduced new cameras D5 and D500 DSLR, Nikon companyannounced its first portable flash with a built-in radio trigger, the SB-5000.

The flagship SB-5000 offers more than just the ability toremote control via radio or optical signal with modes MasterAndSlavefunctions, but alsocoolingsystem, allowingdoseriesbefore120 consecutive pulses at full power.

FlashNikon SB-5000 is compatible withthe mostrelevantNikonDSLR cameras in all main modes. But there is a limitation on innovation functionsand radio control - at this stage itcan only be used with new cameras NikonD5 or D500 (also requiredexternal transmitter NikonWR-R10 andadapter WR A10, attachedeto the camera).

FlashNikonSB-5000It hasleading number 55 (200 mm zoom, ISO 100), which is slightlyOmore, than the previous flagship flash SB-910with its value 48. PAt the same time SB-5000alsomuch more compact.

The new flash's control logic has been slightly changed - several functions are assigned to the control dials of the OK button, so the SB-5000's interface provides quicker access to frequently used functions such as flash exposure compensation, reflector zoom and flash mode.

The “Info” button allows you to quickly access the settings. And one more change - radio control settings can be set directly from the Nikon D5 and D500 camera menu.

FlashNikonThe SB-5000 is also equipped with aOLarger matrix LCD screen.

KEY FEATURES OF SB-5000

• Guide number 55m(ISO 100 / 200mm Zoom)
• Flash cooling system—allows for more than 100 consecutive flashes at full power
• Flash Modes – iTTL/M/Multi
• High Speed ​​FP Sync (HSS) up to 1/8000th
• FEC / FEB –1/3 steps (±3 stops)
• FEL (Flash Exposure Lock)
• Power adjustment – ​​from 1/1 to 1/256 in 1/3 step increments
• Built-in radio synchronizer with Nikon WirelessRadio support (Works with D5 or D500 cameras, and WR-R10 / WR-A10 transmitter / adapter)
• Number of groups in Master Radio mode – 6 (A / B / C / D / E / F)
• Combination of optical and radio slave mode - 3 optical groups (A / B / C), 3 radio groups (D / E / F)
• Slave radio mode – 6 groups, 4 channels.
• Radio synchronization range is approximately 30 meters
• NikonOptic Wireless Master & Slave modes with Nikon CLS system - 3 groups - A / B / C, 4 channels
• Optical sync range – in the field of view
• Full charge – From 1.8 s (approx. with Ni-MH 2600 mAh batteries)
• Pulse duration – 1/980 sec at 1/1 (full) output power, 1/30820 sec at M 1/256 output power
• Head rotation – 360 degrees, head tilt – from -7 to 90 degrees
• Large matrix LCD display
• Autofocus illuminator
• Slave flash support mode via SU4 optics
• Pilot pulse
• Custom Settings
• Auto memory function
• Sound signal
• overheat protection
• External port for HV battery
• OptionalSK-6 Power Bracket Unit
• PC Sync Port
• Dimensions – 73 x 137 x 103.5mm
• Weight -   420 g (without batteries)

WIRELESS RADIO SYNCHRONIZATION

Several years after Canon released its RT-based RF sync system, Nikon has finally introduced a wireless RF sync system for its portable flashes with the new Nikon SB-5000 and Nikon D5\D500 cameras.

Nicon AWL (Advanced Wireless Lighting) \ CLS (Creative Lighting System) technology can now operate via radio synchronization. This makes it much easier to work with clutter in the field of view and strong fill light.

Using the flash control menu in Nikon cameras D5\D500 or the control interface in the SB-5000, mounted on the hot shoe, you can fully control the operation of up to 6 groups (A\B\C\D\E\F) of SB-5000 portable flashes directly from the camera at a distance of up to 30 meters.

Unlike Canon's RT system, which is compatible with some cameras released before its release, Nikon's radio sync system can only work with the new Nikon D5 and D500 cameras (and all Nikon cameras that will be released in the future).

To control flashes via radio, the D5 and D 500 also require a small external Nikon WR-R10 transmitter (previously used for the remote shutter function) to be connected to the front.

The new Nikon D5 and D500 cameras are equipped with a 10-pin port on the front of the camera and a small WR-A10 adapter is required to connect the WR-R10 transmitter to it.

The devices combined in this way are then attached to the front of the camera.

In contrast to the inconvenience of using additional devices for radio synchronization, at least one advantage can be highlighted - the hot shoe remains free for installing lighting devices, radio synchronizers, microphones, etc.

But still, it’s a strange decision, to be honest. Why not make this transmitter built into the camera? Then this would be a real innovation, and not a banal “chase for Canon RT”...

The WR-R10 transmitter itself does not have a flash control interface, so full control of up to 6 groups of remote flash units can be achieved through the D5 and D500's built-in flash control menu.

Just like in Nikon optical wireless synchronization systems, it is possible to set TTL, Manual, OFF modes in various groups Flashes and radio-controlled systems can also work simultaneously with TTL and Manual modes. Nikon has also added A:B flash output settings, similar to Canon systems, for users who prefer to adjust their settings this way.

Hot shoe mountedcamerasNikonD5 or D500 flash SB-5000 can also serve as a 6-group control interfaceSB-5000 remote flash unitsthroughradio channel - i.e., in this position the user has the choice of controlling slave flashes through the camera menu or through the flash menu. But in the second option, the WR-R10 + WR-A10 adapter must still be installed on the camera; there is no transmitter in the flash itself.

Another one interesting opportunity- a combination of optical and radio synchronization, which allows you to use a line of Nikon flashes, such as SB-900, SB-910, SB-800M SB-700, SB-600, etc., in a setup with the SB-5000. When combining optical and radio synchronization, 3 optical groups (A/B/C) and 3 radio groups (D/E/F) are available.

Using the SB-5000 flash mounted on the camera's hot shoe, you can control optical and radio groups. Or you can control 3 radio groups and another Nikon handheld flash (SB-910, for example) or the SU-800 transmitter can be installed in the hot shoe to control 3 optical slave groups.

DETAILEDCHARACTERISTICS NIKON SB-5000

Transmitter mode  – radio control and optical communication

Rangeactions– Radio synchronization is about 30m, optical communication is in the field of view.

Guide number  – 34.5 m/35 mm 55 m/200 mm (FX format, standard metering mode) (at ISO 100)

Electronics design  – Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuits

Exposure Control  – i-TTL Balanced Fill-Flash with CLS-compatible cameras

Zoom values  – 24 to 200mm, 14mm wide panel (FX format)

Metering mode –

The angle of light propagation is automatically adjusted to the camera image area for the same for FX and DX formats.
Standard
Even
Center-weighted

Other available features

Test pulse button
Intelligent AF Assist
Modeling flash mode

Incline  – the flash head tilts down to -7° or up to 90° with locking stops at -7°, 0°, 45°, 60°, 75°, 90°

Turn  – The flash head rotates horizontally 180° clockwise and counterclockwise with locking stops at 0°, 30°, 60°, 75°, 90°, 120°, 150°, 180°

Minimum recharge time –

1.8 s (approx.) with Ni-MH (2600 mAh) batteries
2.6 s (approx.) with AA-size Alkaline (1.5V) batteries

Pulse length –

1/980 spri M 1/1 (full)output power
1/1110 s at M 1/2 output power
1/2580 s at M 1/4 output power
1/5160 s at M 1/8 power output
1/8890 s at M 1/16 power output
1/13470 s at M 1/32 output power
1/18820 s at M 1/64 output power
1/24250 s at M 1/128 power output
1/30820 s at M 1/256 output power

Pitanie  – 4 rechargeable batteries or alkaline AA batteries

Externalpower supply  – SK-6 Power Bracket Unit, SD-9 High-Performance Battery Pack

Flash-ready indicator –

Rear and front indicator blinking: There is not enough light for correct exposure (in i-TTL, Auto Aperture flash, Non-TTL Auto flash, or Distance-priority manual flash modes).

The rear indicator is on, the front indicator is blinking: charged and ready for an impulse.

Light about readiness  – front–rear

Exposure compensation –
-3.0 EV to +3.0 EV with 1/3 step increment in i-TTL auto flash, Auto Aperture flash, Non-TTL auto flash and Distance-priority manual flash modes

Minimum number of pulses/recharge time –

150/2.6-30 s(1.5V AA Alkaline-manganese)
190/1.8-30 s or more(1.2V AA rechargeable Ni-MH batteries)

Wireless flash modes  – Master, Remote

Wireless groups –

Radio controlled: Master + 6 groups
Optically controlled: Master + 3 groups

Dimensions  – 2.87 x 5.4 x 4″ / 73 x 137 x 103.5 mm (approx.)

Weight(approx)  – 420 g

Description:

Nikon Speedlight SB-700 is an easy-to-use and versatile flash for FX and DX cameras.

Guide number 28/39.

Supports Nikon Creative Lighting System. Support i-TTL mode.

Three lighting patterns.

Supports Master and Slave flash modes, can control two groups of flashes.

Shooting with wireless control (Remote) and support for SU-4 mode (ignition of the flash from any other).

Working in fast sync mode.

Overheat protection.

Automatic zoom head for focal lengths 24 - 120mm for full frame FX cameras and 16 - 85mm for DX cameras.

Rotation of the flash head is 360 degrees in the horizontal plane, 90 degrees up and 7 degrees down.

Built-in business card reflector and wide-angle diffuser.

The flash kit includes a case, a holder, two color filters, and a diffuser.

Power supply: 4 AA batteries or rechargeable batteries.

Fast recharge.

Large informative LCD display with backlight.

Setup and management:

To install the flash on the camera, remove the hot shoe cover from the camera.

Check that the flash mount switch is in the extreme left position before mounting. After installation, fix the flash by moving the switch to the extreme right position marked “L”.

If you shoot in automatic modes and controlling the camera and flash is not important to you, then all you need to do is switch the left switch to the upper position - TTL mode. In this mode, using the Nikon Speedlight SB-700 will be virtually no different from how you used the built-in flash.

Turning on the flash is done by simply turning the switch to the ON position, and switching to REMOTE and MASTER modes is done by turning the same switch while simultaneously pressing the button located in the center of the switch.

If the flash is ready for use, the FLASH button will glow red; when you press the FLASH button, the flash will fire a forced flash.

Adjustment of flash compensation in TTL mode, if necessary, is carried out with the SEL button. To operate, you can press the SEL button repeatedly or, after pressing the SEL button, rotate the control dial. To exit the compensation adjustment mode, press the OK button.

Flash menu:

To go to the Nikon Speedlight SB-700 flash settings menu, you must press the MENU button. The flash menu contains 11 items. Selecting a menu item is done with the OK button; navigation through menu items is done by rotating the control dial. To exit the menu, press the MENU button.

1. Filter - allows you to manually set the color filter to use.

2. Remote - menu for setting up remote flash operation in slave flash mode Advanced or SU-4. Advanced mode is used when the flash is controlled by a master flash; not all flashes can be set as master flashes. To work with such flashes, use the SU-4 mode, which allows you to control the slave flash using any flash, even built into a cheap compact. From Nikon's amateur line of DSLRs (D3000, D3100, D3200, D5000, D5100 and D5200), the built-in flashes cannot operate in master mode; these cameras use the SU-4 remote operation mode. The built-in flash of the Nikon D7000 is already capable of working in slave flash mode, so both modes can be used with the Nikon D7000.

3. Turn on or off the flash ready sound signal.

4. LCD - control the contrast of the flash LCD display.

5. STBY - Controls the standby mode, the time after which the flash will go into power-saving standby mode.

6. FX/DX - matrix type selection menu. FX is used for full-frame cameras, DX is used for “cropped” cameras (D3000, D3100, D3200, D5000, D5100 D5200, D90 and D7000) When selecting FX<->The DX flash will automatically detect the type of matrix used; it is determined only when the flash is used with Nikon cameras.

7. “M” - Sets the flash power adjustment step. Two options are given: smooth 1/3EV and rougher 1EV.

8. m/ft - sets your usual distance measurement unit in meters or feet.

9. AF - use of autofocus illuminator to make it easier to point the camera at the subject.

10. Ver. - Information point storing information about the flash firmware version.

11. RESET - resets all flash settings to default settings.

To switch the flash to manual control mode, move the switch slider to position M.

The flash power can be changed by pressing the SEL button; to quickly set the required power, use the control dial. The flash power varies from 1/1 to 1/128 in increments set in the settings of 1/3EV or 1EV. After reaching the limit values, the flash moves to the beginning or end of the settings scale, depending on the direction of rotation of the dial.

To set the required value focal length use the ZOOM button, select desired value done by rotating the control dial. For DX cameras the following values ​​are available: 16mm, 17mm, 18mm, 20mm, 24mm, 28mm, 35mm, 50mm, 70mm and 85mm. For FX cameras the following values ​​are available: 24mm, 35mm, 50mm, 70mm, 85mm, 105mm and 120mm.

Remote control of the flash using any other flash is carried out in SU-4 mode. In this mode, firing any flash installed at a distance of approximately 10 meters will “ignite” the flash.

Using this mode is relevant for the following models of SLR cameras Nikon amateur lines: D3000, D3100, D3200, D5000, D5100 and D5200, since in these Nikon cameras the built-in flash does not support master flash mode. You can use SU-4 mode with any camera equipped with a built-in or external flash. The exception is cameras with LED flash.

To use SU-4 mode, you must enable it in the Remote menu of the Nikon Speedlight SB-700.

Set the switch to Remote, slave flash.

After which the red backlight in the front of the flash will begin to blink, and the inscription Remote SU-4 will appear on the display, which indicates that the flash is waiting for a “command” to fire.

Using color filters. Flash filters are used to create interesting color effects or to compensate for the shortcomings of artificial light sources so that the picture matches daylight. The included orange SZ-3TN filters are used for correction when shooting indoors using incandescent lamps. The SZ-3FL green filter is used to correct lighting when photographing with fluorescent lamps.

Nikon SZ-3TN and SZ-3FL proprietary filters are automatically detected when installed on a Nikon Speedlight SB-700 flash. For other filters, if necessary, you can make changes to the flash settings in the Filter menu.

To obtain diffused light, use the SW-14H diffuser cap included with the flash kit; to enhance the diffused effect, use the SW-14H in conjunction with the built-in wide-angle diffuser. The use of diffusers allows you to eliminate or reduce the presence of contrasting shadows in a photograph.

Now the question is how to use it correctly. For now, I’ll skip the more detailed points and talk about how to quickly and easily use this device at work.

To begin with, we installed a flash on our camera. It is imperative that it be a Nikon company, because... With other companies, the flash may not work correctly. Be sure to fix the flash using a special toggle switch near the mount, so our flash is guaranteed not to fall. We check carefully, everything should hold.

Turning on the flash is as easy as shelling pears, turn the toggle switch to mode ON.

Next, to the left of the display, switch the flash mode to TTL. The flash itself selects the pulse power. Now on the right, switch the impulse to the very first division from below. So we get a working ZOOM from 11mm to 120mm.

Depending on the lens ZOOM is set automatically.

You can adjust the power using the wheel, but I would recommend initial stage don't think about it.

Koepka FLASH signals the readiness of the impulse. To avoid stressing the lamp and get brighter pictures in poor lighting, I recommend raising . Also, I don’t recommend closing the aperture too much. So, we will get less load on the lamp and large quantity pulses before the flash goes into deep recharging (during continuous shooting).

There is a built-in reflector and a diffuser included.

When using them, ZOOM does not work and drops to 11mm. I would recommend using these things in light backlight for daytime photography, such as portraits.

Basically, that's it, now we have working flash settings. I would recommend using these settings when shooting in A (aperture priority) mode.

How to increase display brightness on Nikon SPEEDLIGHT SB-700

Turn on the flash, press the MENU button, get into the menu. Here we select LCD, press the OK button on the wheel, and set the desired brightness, or rather the contrast. Then press the OK button on the wheel again. The selection is made by rotating the wheel.

Friends, ask your questions about Nikon SB-700 in the comments and subscribe to our newsletter.

For the opportunity Nikon Speedlight SB-700 flash review huge gratitude Sergei Svirida.

Nikon SB-700 is an advanced amateur flash. Great alternative between professional and simple. And Nikon SB-700 is much better.

The flash has a fairly compact size and a number of good properties, such as:

1. Flash zoom from 24 to 120mm. This is a good indicator. Amateurs often use lenses like 18-55mm, 18-105mm, 18-135mm; for such lenses, a Nikon SB-700 flash will be completely sufficient for head-on illumination.
2. The flash can operate in Master and control other flashes that support the Creative Lighting System. The flash can control two groups of flashes A and B. More advanced ones can control three groups of flashes simultaneously.
3. The flash works great in Slave mode using . I had no problem firing the SB-700 using the built-in flash on my .
4. Unlike, the SB-700 has the ability to work in and be set on fire by any flash, even a flash from a mobile phone.
5. Nikon SB-700 has a built-in reflector card and a built-in diffuser, which are hidden in the flash head. A diffuser is a very useful thing that helps out in difficult conditions when working with flash.
6. Comes with flash two filters and a large diffuser. The set also includes a flash foot and a square case. It is convenient to mount the flash on the foot and place it on a tripod to create creative lighting. But it has a case that can be comfortably worn on your belt, unlike the case of the SB-700. The Nikon SB-700 kit is quite decent.
7. The flash works on 4 batteries or rechargeable batteries. Recharging is fast, recharging very much depends on the operating mode of the flash and the quality of the batteries.
8. Of course the SB-700 supports FP fast sync mode, which will allow you to shoot at any shutter speed up to 1\8000s, which is very important for.
9. The SB-700 has a huge display on which all settings are clearly shown. The SB-700 has a very nice flash mode switch.
10. SB-700 has overheat protection. It is very difficult to cause the SB-700 to overheat, much more difficult than,. The overheating function is not disabled.
11. The flash head rotates 360 degrees, which is very convenient when working with lighting from the ceiling and walls. Also, the head rotates 97 degrees up/down.

Personal experience:

Nikon SB-700 is an excellent flash in terms of price/quality ratio. It is light, fairly cheap and very functional. Nikon SB-700 works great in i-TTL automatic modes. Before the release of the Nikon SB-700, in order to be able to remotely control Nikon flashes on cameras without support, you had to buy expensive