The iPhone does not connect as a modem to the computer. Connecting iPhone to a computer or laptop via USB cable in modem mode

I think many of you have been in a situation where there is a regular PC or laptop nearby, but there are no Internet access points on it. And access to the network at the same time is very necessary from a computer. If you have your own iPhone, then it will help you decide this problem using the modem function.

In this article, we'll talk about how to enable modem mode, if you have it in the settings. There are still cases when this item is simply hidden in the menu, and if you have a similar case, then you will learn how to return this setting. The only thing you need is access to the network on your iPhone (preferably unlimited, since you simply won’t notice how you will go into a huge minus on your balance).

How to enable hotspot mode on iPhone

To do this, follow the following instructions:

1. Go to "Settings".
2. Click " cellular" and there are two scenarios here: you see the item "Modem Mode" or it is not there, but we'll talk about this later.
3. Go to Cellular Data Network. It often happens that this setting is at the very bottom, so scroll to the very bottom. Then you will see the blank fields "Name, password APN". You need to enter any username (this will be enough).
4. Now in the settings the active “Modem mode” should already appear. If it is in an inactive state, then go back to the "Cellular" item and turn on the modem.
5. "Modem mode" is turned on and all that remains is to connect to it through another device and use the Internet.

Function setting via Wi-Fi, Bluetooth or USB

Apple developers took care of their users in advance and made it so that you can distribute access to the World Wide Web via Wi-Fi, Bluetooth or USB, which is quite convenient and easy. Let's look at each of the methods in more detail.

Connecting "Modem mode" via USB

If you have Windows 7 and older or Ubuntu installed on your computer, then you can easily set up your iPhone as a modem via USB, just follow the instructions below:

1. Connect the phone via cable to the computer and you will usually see a window with a choice of programs to run. Just close it, because it doesn't matter for setting up the Internet.
2. Go to "Settings" and go to modem mode, there you will see the item "Shared USB tethering". After turning it on, your computer is in Internet sharing mode.
3. To disable this mode, simply turn off the Shared USB tethering feature on your phone and disconnect the USB cable from your computer.

Modem mode connection via Bluetooth

Apple technology can also support network access via Bluetooth, and to set up such a connection, follow the instructions:

1. Connect your phone and computer via Bluetooth data connection.
2. Set up an Internet connection via Bluetooth on your computer (how to set it up correctly depends on the computer model, so for this information it is better to refer to the instructions that come with the computer).
3. On your phone, go to the "Settings" menu and turn on "Tethering Mode".
4. Enable Shared USB Tethering. Your phone and computer are now in shared mode.

Connecting "Modem mode" via Wi-Fi

Making it so that your phone distributes the Internet via Wi-Fi is very easy, and you will see for yourself now. To do this, follow the instructions:

1. Open "Settings" and go to the "Tethering Mode" menu.
2. Find the "Wi-fi hotspot" function and activate it. Now the phone will be able to distribute the Internet via Wi-Fi to which up to eight users can simultaneously connect.
3. To disable the distribution of Internet access, do everything in reverse order.

Additional Information

In modem mode, when another device is connected to you, the status bar changes color to blue and displays the number of connected devices, which makes it easy to monitor the status of the Internet distribution.

It should also be remembered that when distributing access to the network via Wi-Fi, only the cellular data network will work.

As you can see, there are many ways to distribute the Internet through your phone. Each method works the same way and does not require additional knowledge. Everything is set up quickly, and in a couple of minutes you can turn your iPhone into an Internet access point.

Most users of ADSL modems do not know its device and what internal settings it has. Therefore, users often complain about poor communication, poor wireless network connection, as well as the so-called "lags" and "brakes".

However, in addition to various functions, the ADSL modem also has several modes that change its operation, thereby giving the user a choice in favor of one or another modem functionality.

Let's take a closer look at how to configure the modem mode yourself and how these modes differ.

ADSL modem modes

The ADSL modem has two modes:

1. Bridge mode.
2. Router mode.

That is, the router works in bridge mode and router mode. Let's take a closer look at these two modes.

Setting the modem to "Bridge" mode

ADSL-modem in "Bridge" mode works like a normal cord adapter telephone line to the network wire to the computer. This mode is necessary because it is impossible to connect a telephone wire directly to the computer's network card.

In this mode, the modem can do nothing. And connecting to the Internet is possible only through obtaining an ip-address and settings from the provider, which, in turn, are entered in the computer settings, not the modem. You enter your login and password on your computer and connect to the network whenever you want.

The advantage of the "Bridge" mode is that it is possible to assign an external ip-address to the computer directly, bypassing the modem. Also, if you have only one computer or device that requires the Internet, then the "Bridge" mode is best suited. However, today this mode is almost never used.

To set the modem to the desired mode, you need:

1. Find the ip-address of the modem in the documentation and enter it into the address bar of the browser.
2. In the opened window for accessing the modem settings, you must enter your login and password, which can also be found in the documentation. Usually, by default, the login and password are the word "admin", however, different models of the modem may have different login and password.
3. You can find the necessary functions in the modem settings. If you can't find it, you can use the documentation or contact the company that made the modem.

After that, the modem will work in the "Bridge" mode.

Configuring an ADSL modem in the "Router" mode

If you have a lot of electronic devices in your apartment that require the Internet, then the “Router” mode for an ADSL modem is best suited. In this mode, the modem will be assigned a network ip address, which will be the same for all devices that will be connected to the modem's shared access point. Also in this mode, you can set up a wireless Wi-Fi network so as not to be dependent on wires.

In this mode, instead of a computer, the modem is authenticated and receives network data from the provider, simplifying the work. The modem acts as a server. However, for this it will be necessary to enter the necessary data from the network provider in the modem settings.

In addition, in this mode, the modem acts as an additional protection against Internet malware. And other modem functions will also become available, such as protecting the network with a login and password, which will allow you not to be afraid of neighbors around your apartment “sticking to the channel”.

All settings are also made through the virtual modem service, as described in the previous section. All information must be available in the documentation or on the website of the modem manufacturer

You can also read our article, which describes in detail the internal settings of the modem.

Users of the "OS" version 9 often report such an error as the modem mode has disappeared. On iPad, tethering is most likely to fail when upgrading from earlier versions of devices to iOS 9.

The problem manifests itself in different ways, depending on the communication company whose SIM card is in the gadget. For some users, the option disappears without a trace from the corresponding menu, for others it does not function correctly. Sometimes it is not possible to turn on the modem mode at all.

This article will discuss the causes of such a problem and how to fix them.

Reasons why the option disappears

Usually, a malfunction manifests itself in the same way on absolutely any gadget (second iPad and others), and with any telecom operator (Yota and the like). And all because it is in no way related to hardware problems or the specifics of a particular device model. In 95% of cases, the malfunction manifests itself after the procedure for updating the device to a more “fresh” version. Empirically, users found out that the cause of the failure was resetting the configuration of the cellular company settings.

As a rule, it is set automatically. All the necessary data is contained in the memory of the SIM card. However, when updating, everything that is possible is reset, and the dial-up mode stops working.

Error Correction Methods

The algorithm for solving the problem, based on its essence, will be identical for all iOS gadgets (iPad 2, iPad mini, Pro and others). The user is required to configure the APN for modem mode.

What does this mean? This is the name and at the same time the address of the access point through which the user is connected to the network. Of course, you will need a password and username. The communications company reads these characters and assigns the correct IP address to the network. Next, a connection will be made to the corresponding security element. It will also determine if a private network connection needs to be set up. In the situation we are considering, when using the modem mode, the gadget will transfer access to its communications company to other devices over the network.

The user is required to do the following:

• Opening settings, going to the cell phone. After you need to proceed to the cellular data network.
• On the pop-up page, the modem mode item will be visible, and under it there are 3 fields. If they are empty, they should be filled in. For the correct operation of the mode we need, a competent APN setting is required.
• Filling in the fields in accordance with the data of a particular operator.

This information can be found in the contract with the communication company. Or contact the office directly. Usually, after applying all the methods, the problem is solved, and the device can again be used as a modem for any operators - Yota and others.

Other causes of the problem

Problems may also lie in the following points:

• Communications company restrictions. If the problem was not solved by the method described above, it means that the service provider has imposed some restrictions. A number of operators put a block on the distribution of the network to other devices on their unlimited plan tariffs. The user should take a closer look at the contract, and if there are restrictions, you just need to change the tariff.
• Error during update operation. If you did not find any restrictions in the document, the problem may arise due to an error that occurred during the process of updating the device to a more new version. In this case, you will need to use a flashing of the “OS”, that is, installing the same version of iOS on a new one.

Please note that during the flashing process, the settings return to their original ones. Therefore, it is recommended to make a backup using iTunes in advance and save it to your PC for later restoration:

• Connect device to PC.
• In the program window, click on the gadget icon at the top left.
• Choose where to save the copy - on a PC or in the "cloud". Confirm immediate copy creation.
• Backup contains all the information stored on the device. Therefore, in the future it will be possible to return any information back.
• Proceed to the firmware operation. Determine the model of the tablet. It is important that the version of the "OS" matches the specific model of the tablet.
• Upload the firmware file as .ipsw. You need to do this only with quality resources. Otherwise, you can catch a virus both on a PC and on an iOS device.
• Disable the device search function. Otherwise, it will interfere with the firmware and will not allow it to be done.
• Turn off device. Connect it to a PC or laptop by pressing the "Home" button. This will put your device into Recovery Mode.
• Click on the restore button on the iPad, thereby causing the inclusion of the file manager.
• Use the iTunes utility. It instantly recognizes the connected tablet. Next, you need to click on the symbol of the device (located at the top, on the left side), and after that - on the recovery element.
• Open the downloaded firmware file in the manager. Wait for the operation to complete. Re-configure the APN modem (for Yota and the like).

The above method should definitely help. And if this does not happen, turn to more radical methods.

Device malfunction

How to turn on the mode in question if it began to disappear?

If the firmware did not give anything, then the problem lies in the hardware of the device. It's possible that the tethering module is faulty and that's why tethering mode on the iPad doesn't work. There's nothing you can do - you have to go to the repair shop. It will not be possible to simply connect the network to the iPad if the problem has not been fixed.

Note that in the ninth version of the operating system, there are problems with wrong work modem mode is solved very simply. The user must use the username and password to access the carrier's access point. But if this step does not help, be sure to contact the experts. Experienced craftsmen will identify the source of the problem and fix it. And the device can again be used as a modem (for Yota and other operators).

How many times it happens that there is a computer, you need to connect to the Internet from your PC, but there is no way to enter through Wi-Fi. What then to do? Is it possible and how to distribute Wi-fi from the iPhone?

Apple iPhone 6 can be used not only as a phone, but at the same time as a modem, while distributing the Internet within the range of your network.

This process can be done fairly quickly by following a few simple steps. Modem mode on the iPhone 6 can also be distributed by Apple smartphones to iPhones 4s, 5s, 6, 6 plus and 7. You can also distribute the Internet to other Apple devices and to any phones, as well as tablets and computers. In turn, other devices such as the iPad, Android OS phones, tablets and computers are also capable of distributing the Internet like a modem.

Having a SIM card to access the Internet with high speed from network operators such as MTS, Tele 2, Yota or Beeline, or other mobile operators, using your iPhone you will be able to activate a Wi-Fi hotspot. Of course, it’s good if you have unlimited Internet, otherwise the traffic will be quickly used up and all the money on the phone account will be spent.

You just need to know how to turn on modem mode on iPhone 6. You can connect an iPhone as a modem when you need to help friends if they run out of traffic on their phone or connect a laptop to the Internet while on the road. The good news is that setting up an Internet access point will take just a couple of minutes, unlike stationary routers and removable modems.

You can distribute the Internet from an iPhone to any device in different ways: through the mode wireless WI-FI, using the Bluetooth function, via a USB cable to a tablet device or PC. Of course, it is certainly more convenient and faster to transfer via Wi-Fi wireless mode.

Consider the option of how to distribute the Internet using WI-FI. In order to solve the question of how to set up and connect the modem mode, how to distribute wifi from iPhone 6, check out the following connection procedure. Open the main menu of your smartphone screen and enter the “Settings” of the phone, then the “Cellular” section and select the “Cellular data network” function. Next, connect the "Modem Mode", after entering the secret password. It is necessary to specify your possible access point for the connection network when the password has not been entered before, otherwise the connection will occur automatically.

The name and connected hotspot from your smartphone will appear on the receiving devices. That is, a so-called virtual modem will appear in the connected device, through which it will be possible to launch an additional PC or other device to the access point on the iPhone. In this case, you need to use the Wi-Fi password, where it is visible in the settings.

If your friends want to connect their smartphones to your iPhone 6 in order to receive Internet distribution from iphone in Wi-Fi mode, and your distributing iPhone 6 is already set up for a modem, they can set up a Wi-Fi access point in their smartphones, and you need to enter the secret access password you made, and confirm the inclusion.

When other devices are connected to your smartphone, you will read a message about this on the status bar. By the way, pay attention to the fact that the mode of the connected Wi-Fi modem is not displayed on the screen. Therefore, the battery in the distributing smartphone can be discharged very quickly.

Know what to give away high speed internet it is possible from one source and to several devices at once: iPhone, laptop, iPad and up to 5 devices at the same time!

Certainly, the speed of battery discharge will be affected by the number of receiving tools connected to the network. How many more of them, how much faster the distributing iPhone will be discharged.

If you need to change your Wi-Fi password, go to Settings again, go to Tethering Mode, and set a new Wi-Fi password.

In this case, the selected Wi-Fi password code must contain at least eight ASCII characters. Other characters will not work, as other devices will not be able to connect to your access point in this modem mode. The characters that won't work are those of languages ​​from Japanese, Chinese, or Russian. The ASCII characters are:

• Upper and lower case letters of the English alphabet;
• Arabic numerals from 0 to 9;
• other punctuation marks.

Disappeared tethering mode on iPhone

Be aware that with the next firmware updates of the phone, the cellular data settings may be reset, so the "Tethering mode" will again drop out of the menu settings.

Is it possible to do something if you were distributing the Internet and suddenly the modem mode on the iphone began to disappear, disconnecting all additional smartphones from the network?

And sometimes, on the contrary, you updated the iPhone program to iOS 8.1 or 9 and the modem settings on the distributing iPhone failed, while the device reports that the modem mode is not available.

It happens that the modem mode simply disappeared and does not work, but it happens that the download does not occur and the modem constantly freezes when the connection is persistent.

Don't assume that the dial-up service is gone or retired. When connecting, it happens as if the six simply turned off the modem function by default, deciding that the owner of the device does not use this service. In fact, this function has ceased to be enabled in order to avoid the company's responsibility for the operation of the modem connection service, taking into account the peculiarities of the settings of various Internet companies, as well as operators of different countries.

Most users, without hesitation, connect their iPhone 6 as a modem constantly to different devices, so setting a lock on this function causes users to resent it because of the inability to solve current problems. This problem can also be solved by restarting the modem.

Removing tethering

The missing modem can be restored by applying the process of deactivating the modem mode in the iPhone 6 or iPhone 6S. It is quite possible if the iOS 9 program is installed. In this case, the subscriber must first enable the modem mode, then manually enter the parameters of his direct operator, for example, the Beeline operator must be written down - Beeline , Tele 2. In this case, the order of entering the settings must be performed clearly in a certain sequence.

If, nevertheless, when connecting to your network, the message “Unable to connect to the network” appears on the screen, you need to fix the problem body that prevents the connection. To do this, take the following steps step by step:

1. Log in from the iPhone to the “Settings” menu section and go to the “General” menu.
2. Go down to the very bottom of the page, find the “Reset” function, then “Reset network settings”.
3. Enter your secret password and wait for the factory reset process to complete.
4. Reconnect to the network.

The completed process should launch the Personal Hotspot feature from iPhone to iPhone 6.

If it so happened that after replacing SIM cards the distributed Internet disappeared in the smartphone, and the modem mode turned off, double-check and enter the correct data of the SIM card operator.

By the way, in practice, the iPhone 6 network and Yota operator and they don't really like each other. If you have updated iOS 8 to version 8.1, then you may well have problems connecting the modem.

Today I will show you how to enable hotspot mode on iPhone in iOS. We will use the iPhone as a wifi adapter via a USB cable using iTunes. This method is suitable as a fallback for connecting a Windows desktop or laptop that does not have any other.

iPhone as a modem for Windows 7, 8, 10 computer

Let's think about when it might come in handy to use the iPhone as a modem?

1. In the event of a breakdown of the main wifi module of the laptop or in the absence of an adapter on the computer
2. If you need to work, but the Internet is not at hand, but there is always a phone in your pocket.
3. Or when on a tablet, which we often take for savings without support for SIM cards, you need to go online, but there is no free wifi at your location
4. Finally, when you have a second smartphone, but tariff plan on the SIM card inserted into it does not have a large number enabled traffic.

As a USB modem on iOS, you can activate absolutely any iPhone - 5S, 6, 6S, 7, 10, XS, XR and so on. The instruction is universal for all models

How to enable tethering on iPhone in iOS?

In general, as you understand, using the iPhone as a modem is sometimes extremely necessary. In order to enable this mode in iOS, there are three ways that depend on how the iPhone will be connected to a laptop or other device:

• By WiFi
• By USB cable
• By Bluetooth

We'll take a closer look at the last two of these modes, since I've written about organizing before.

How to connect iPhone to computer as USB modem via iTunes?

To connect your computer to the Internet, you can set up your iPhone as a wifi adapter via a USB cable. But for this prerequisite is the installed iTunes program. To activate the modem mode, simply connect the iPhone to the USB port of your computer or laptop. The manufacturer, of course, recommends using the original cable, since otherwise the connection may not be established, but everything worked for me with Chinese for 100 rubles from Auchan.

If you are doing this for the first time, then a question will appear on the screen whether to trust this computer - we agree

After that, the Internet through the iPhone should work - to make sure of this, in Windows we go to the Network and Control Center public access»

iPhone as a wifi adapter via Bluetooth for a Windows computer

The way when the Internet is distributed from the iPhone to a laptop or computer using Bluetooth connections is the most sophisticated. And I don't know if anyone will ever use it. Not because not all laptops, and even more so computers, have “blue tooth” support, but because I’m afraid that an iPhone with both wifi and bluetooth turned on will live less than an hour

Well, okay, since such a function exists, it is necessary to show it.

Now you can also see on Windows whether the modem is connected - this information is in the "View Bluetooth Network Devices" section

We have analyzed two ways to enable hotspot mode on iPhone - choose any and use it!

Thank you! Did not help

Apple- American company, which was one of the first to develop multitasking operating systems and building a PC. The company does not exchange small things for economy-class products - it has been recognized as the most expensive brand in the world. Apple specializes in the production of cell phones, tablet computers, laptops, media players, system blocks, computers and software. You can buy the latest Apple products at the link https://istudio.ua/iphone/.

Using phones as a modem to access the Internet is increasingly becoming necessary. These are business trips and travel, holidays in country houses and so on, where providers do not have the opportunity to arrange coverage. Here come to the rescue mobile operators providing mobile internet services.

There are several ways to use an iPhone as an access point (tethering):

• Internet access by connecting a USB cable to a computer;
• Internet connection via Wi-Fi or Bluetooth phone.

The last connection method became possible with the advent of iOS version 5. Thus, it became possible to use iPhone as a full-fledged Wi-Fi router.

Setting up iphone as a modem

There is nothing easier than setting up an iPhone to work in modem mode, for this you need:

1. Go to "Settings" - click on the "Modem Mode" tab.
2. Change the switch to the "On" position (swipe right or left to change the value).
3. In the fields that appear, come up with and type a password to gain access to the access point.

These are all the steps you need to take to use your iPhone as a modem. Note that there is no indication on the phone that it is working in modem mode, but the battery is this case dissipates very quickly. This connection procedure works for both iPhone and iPad.

Connecting client devices to iphone

To connect a client to the Internet via Wi-Fi to an iPhone, you must select a phone name from the available access points and enter a previously set password for access.

To connect iphone as a modem via usb;

• First of all, connect the cord to your phone and the corresponding USB port on your computer.
• Select "Control Panel" - "Network and Internet" - "View Network Status". An active network connection should appear in the window that opens.
• If this does not happen, and the computer does not see the iPhone as a modem. Then you need to reboot and reconnect the iphone.

It is worth noting that in order to connect an iPhone to a computer via usb, it is required that iTunes version 10.5 or higher be installed on it.

To connect using Bluetooth, you need to activate these services on your phone and on your computer, respectively. On the iphone in the Bluetooth settings, click create a pair and enter the password that will be displayed on the computer. After the devices connect with each other, you can use the Internet.

Can be used as a modem iPhone, it meets certain system requirements and uses the carrier's cellular connection.

How to use iPhone as a modem

The first step is to make sure cellular data is turned on and you have Internet access.

Then open the settings and look for there.

It happens that this function is not prescribed as a separate item in the settings in some versions of IOS. Then it is necessary go to cell phone and find modem mode there.

If the required item is not there, then it is necessary set modem settings on one's own.
Select "cellular data network" and find the modem mode there. The same data (APN, username and password) are registered here as in the Internet settings. We reboot the phone and the modem mode appears in the settings as a separate item.

There are three ways to use your iPhone as a modem

Connecting via Wi-Fi

The easiest way. You need to enable tethering and set a password, which will be entered by the person who is about to connect to your device. We find the network by the name of the device and enter the password.

If you did everything right, then your phone will start distributing Wi-Fi, a person who knows the password will be able to access it and on the phone at the top of the screen you will see the number of connected devices.

Connecting via USB cable

In order to access the Internet from a PC using a USB cable, you need to connect the Iphone to the computer, it is best to do this using the original cable, other cables may make an incorrect connection, or not make it at all, then an inscription will appear on the phone screen that this accessory is not supported.
When you insert the cable into the computer, the phone screen will ask you "Trust this computer?", answer yes to establish the connection. Required in Windows 10, 8 and Windows 7 Apple iTunes must be installed(can be downloaded for free from the official website), otherwise the connection will not appear.

Then find your iPhone in network connections and connect, the password is set in the phone.

Connection via Bluetooth

If you want to use your phone as a Bluetooth modem, you first need to add a device (pair) in Windows. Bluetooth, of course, must be enabled on both the iPhone and the computer or laptop.
Right-click on the Bluetooth icon in the notification area and select "Add a Bluetooth Device".

Then pair up. On the screen of the phone and computer will appear secret code, if it matches, you must confirm, then the devices will connect via Bluetooth.

After the pair has been successfully created, you need to connect to the Internet through the Iphone hotspot. To do this, go to the “devices and printers” menu on the computer, find the Iphone we need there, right-click and connect.

The phone will display “Modem mode”, indicating that the connection is correct. To carry out these operations, you may need an up-to-date version of iTunes, if your version is outdated, then you need to reinstall it. During the distribution of the Internet, the phone remains connected and has the ability to receive SMS messages and incoming calls. When talking, the Internet connection is interrupted and automatically restored after it ends.

But at the same time, you need to remember two things: when working in modem mode, the device is discharged much faster, so after you finish working, you need to turn off the "Modem Mode" function, and you distribute your mobile traffic don't overdo it if you don't have unlimited Internet, certainly. Billing is carried out according to the amount of information downloaded and transferred, which will quickly bring your balance to zero.

Enjoy using.

Surely many iPhone users know that it can be used as a modem. You can do this via USB, Wi-Fi or Bluetooth connection. However, not every iPhone owner knows how to properly enable modem mode on their gadget and use it to access the network in Windows or Mac OS X.

It is worth noting that in our country very few people use this function. This may be due to the fact that telecom operators can specifically block the ability to access the Internet for several devices through one. If it doesn't work, start modem mode on Apple device, then it is worth contacting the telecom operator for detailed information.

To start this mode on the iPhone, you need to go to "Settings", where select "Cellular". Here you need to make sure that in the "Cellular data" section data exchange is activated. mobile network. If it is disabled, then this mode will not be visible in the parameters.

If everything is in order, then you need to click on "Modem Mode" and activate it. If at the same time Bluetooth or Wi-Fi is disabled, a prompt will pop up to activate them. This will allow you to use it not only via a USB cable, but also via Bluetooth. In addition, there is the possibility of your own password for the wireless network, which will be distributed by the iPhone. This is useful if the device will be used as an access point.

Using iPhone as a modem in Windows

The Windows operating system is installed on most of the existing PCs in the world, so the first thing to consider is the option of using the iPhone as a modem for it. The execution of this process is not much different depending on the version of Windows and iOS.

USB connection

To be able to use your iPhone as a modem using a USB cable in the latest versions of Windows, you need to install iTunnes. You can download it from the official resource, and for free. If you do not install iTunes, then the connection is not possible.

After downloading everything you need and activating the modem mode on mobile device, you just need to connect your smartphone through the cord to the PC. When you connect to a PC for the first time, your iPhone may prompt you to confirm that you trust this PC. Here you need to click "Yes", otherwise nothing will work.

After a few seconds, a new network connection will appear on the PC with the name of the Apple Mobile Device Ethernet network. After that, the Internet should appear. To view the connection status, right-click on the connection icon in the system tray and select "Network and Sharing Center". Next, you need to click "Change adapter settings", which will display a list of existing connections.

Sharing Wi-Fi from iPhone

If Wi-Fi is running on the smartphone when modem mode is activated, then you can
use your device as an access point. In this case, you can simply connect to a wireless network with the name iPhone and a password that you can set or see in the tethering settings on your smartphone. Basically, the connection is made correctly and immediately there is access to the Internet on the PC.

iPhone Tethering Mode over Bluetooth

If you want to use your smartphone as a BT modem, then you must first add the gadget to Windows. In this case, Bluetooth must be running on both the PC and the smartphone. You can add a gadget in various ways.
You can right-click on the BT icon in the system tray and select "Add a Bluetooth Device". In addition, it is possible to do this through the control panel, where you should click on "Devices and Printers", and in a new window click on "Add Devices".

In the "top ten" you need to go to "Settings", where you should select "Devices", and then click Bluetooth, after which the search for the gadget will start. After defining the phone, regardless of the adding option, you need to click on the icon with it and click "Link" or "Next".

At this time, a proposal for organizing a connection will appear on the display of the device, where you need to click "Create a pair". A window will appear on the PC screen, which will indicate the correspondence of the codes. Here you need to click "Yes". You must first perform on a smartphone, and then on a PC.

After these manipulations, you need to go to the network connections on the PC and specify the Bluetooth connection. This can also be done using the Win + R combination, where you should write ncpa.cpl and click OK. If the connection has already been created, then no action can be taken.

Then at the top you need to click "View Bluetooth Network Devices". As a result, a window will appear where the smartphone will be displayed. Right-click on it and select "Connect via", and then click "Access Point". After that, you should have access to the Internet.

Using iPhone in Personal Hotspot Mode on Mac OS X

In the case of connecting the iPhone as a modem to a Mac computer, then the process is simplified several times. If Wi-Fi is used, then you just need to connect to the iPhone access point with the password that is specified in the gadget's modem mode settings. It is worth noting that the passcode may not be used, but for this, the computer and smartphone must have the same iCloud account.

If you need to use a smartphone via USB, then you just need to connect the phone to the computer and everything will work right away, but for this you need to start the modem mode. If nothing happened, then you should go to the OS X settings and specify the network. Then you need to select "USB to iPhone", where you need to uncheck "Turn off if you do not need it."

Only in the case of Buetooth it is necessary to do a few manipulations. In this case, you need to go to the Mac settings, where you need to select "Network", and then Bluetooth Pan. Then you need to click "Set up a Bluetooth device" and find your smartphone. After the connection is established, the Internet will appear on the PC.

In general, these are all possible options for using the iPhone as a modem. If there is no tethering mode in the smartphone settings, you need to check the data transfer over the mobile network.